Foreign trade:+86 021-59972289
Switchboard: +86 021-59975395
Fax: +86 021-59975396
Domestic trade: + 86 021-59975397
After sales: +86 021-59970393
Free Hot Line: 400-920-8955
24 Hours Emergency Contact:
Foreign Trade Sales Manager : Mrs Catherine Li
Cell/ What's App /Wechat : + 86 130 5236 5526
Add：1031 Jiatang Road, Jiading District, Shanghai
Name：MS series 1000-2000KG
1. Safer vertical water tube boiler structure
As one of the safest boiler structures, the water tube boiler structure has an upper header steam storage package to ensure better steam quality and higher thermal efficiency.
2. A smoother nine-level linear speed change experience
The steam volume is 1:9 ultra-long regulation ratio output, the minimum steam volume is as low as 150kg/h without stopping, the steam pressure is more stable, and the use is more energy-saving.
3. Equipped with high-efficiency full 316L condensing heat exchanger
Equipped with high-temperature economizer and low-temperature condenser, made of corrosion-resistant all 316L stainless steel, the exhaust temperature is as low as 55℃, the boiler is charged to absorb the latent heat value released by the condensation of water vapor in the flue gas, and the thermal efficiency reaches 100.1%.
4. Low NOX emissions
Adopt advanced combustion process control technology to effectively suppress NOX production during the combustion process and meet the most stringent environmental protection requirements. NOX emissions are as low as 10mg/m3.
5. Free of use certificate, free of operation certificate, free of annual inspection
The water volume of the main body is less than 30L, and the pressure can reach 1.0/1.3/1.6MPa. According to the national regulations, the "Boiler Regulations" does not belong to the inspection scope of boilers and pressure vessels.
6. New 360° heat exchange flue gas process application
The combustion flue gas radiates the water pipes uniformly at 360°, so that each water pipe balances heat exchange, avoids local overheating and easy fouling and tube bursting, which better extends the service life of the equipment.
7. Low gas pressure combustion
It meets the minimum gas pressure of 1.8kpa and burns with slight positive pressure. It can operate stably in the face of pressure fluctuations in the pipe network, and is not affected by peak gas consumption.
8. Intelligent remote control system of Internet of Things
The boiler runs fully automatically, adopts 7-inch color touch screen, has a variety of adjustment and protection functions, and is simple to operate without special personnel on duty; the control system can realize group control and remote monitoring functions.
1. Boiler design and manufacturing are selected in accordance with the "Steam Boiler Safety Technical Supervision Regulations".
2. The heating surface material and welding rod and wire used in the boiler should have a quality certificate.
3. Boiler manufacturing is carried out in accordance with JB/T1618 "Technical Conditions for Manufacturing Pressure Components of Boiler Shell Boilers".
4. Boiler welding is carried out in accordance with JB/T1613 "Technical Conditions for Welding Boiler Pressure Components".
5. The welding of boiler pressure components must be performed by welders who have passed the examination of "Examination and Management Rules for Welders of Boiler, Boiler, Pressure Vessel and Pressure Pipe".
6. Boiler non-destructive flaw detection test According to JB/T4730 "pressure-bearing equipment non-destructive detection" and "Steam Boiler Safety Technical Supervision Regulations" Article 82, the welded seam should be 100% flaw detected, and the quality is not lower than II and qualified.
7. After the boiler is manufactured, it shall be carried out in accordance with JB/T1612 "Technical Conditions for Boiler Hydraulic Test", and the test pressure is 1.2MPa.
8. Refer to the relevant regulations of JB/T1615-91 for the paint, packaging and transportation of the boiler