Foreign trade:+86 021-59972289
Switchboard: +86 021-59975395
Fax: +86 021-59975396
Domestic trade: + 86 021-59975397
After sales: +86 021-59970393
Free Hot Line: 400-920-8955
24 Hours Emergency Contact:
Foreign Trade Sales Manager : Mrs Catherine Li
Cell/ What's App /Wechat : + 86 130 5236 5526
Add：1031 Jiatang Road, Jiading District, Shanghai
Name：LNS series 500-1000KG
1. Low NOX emissions
Adopt advanced combustion process control technology to effectively suppress NOX production during the combustion process and meet the most stringent environmental protection requirements.
2. Exemption of use permit Exemption of operation permit Exemption of annual inspection
The body water volume is 48.2L. According to the "Boiler Regulations", boilers with a water volume less than 50L and a pressure not exceeding 0.8Mpa do not need to go through the procedures for use, do not need to go through the annual inspection, and do not need the operation certificate.
3. Equipped with integrated condensing heat exchanger
Equipped with high temperature economizer and low temperature condenser, the exhaust gas temperature is as low as 63 ℃, the boiler fully absorbs the latent heat value released by the condensation of water vapor in the flue gas, and the thermal efficiency reaches more than 100%.
4. Fully premixed combustion technology
The fully premixed combustion system mixes air and gas in an ideal ratio. After combustion, the heat radiation is transferred to the heat exchanger, and the heat intensity is uniform, ensuring higher combustion efficiency and environmentally friendly emissions.
5. Low gas pressure combustion
Low-pressure gas supply, slightly positive pressure combustion, stable operation in the face of pressure fluctuations in the pipe network, and not affected by peak gas consumption.
6. Intelligent control system
The boiler runs fully automatically, with a variety of adjustment and protection functions, and is simple to operate without special personnel on duty; the control system can realize group control and remote monitoring functions.
7. Rapid steam production
The boiler body adopts a small volume and high heat radiation design, and the steam generation time only takes 5 minutes, and the rated steam pressure can be reached in 10 minutes.
8. Scale automatic monitoring and alarm
The fouling condition of the tube wall is measured by monitoring the body exhaust gas temperature. When the internal fouling of the boiler is slight, it will automatically alarm, and when the fouling is serious, it will be forced to stop.
1. Boiler design and manufacturing are selected in accordance with the "Steam Boiler Safety Technical Supervision Regulations".
2. The heating surface material and welding rod and wire used in the boiler should have a quality certificate.
3. Boiler manufacturing is carried out in accordance with JB/T1618 "Technical Conditions for Manufacturing Pressure Components of Boiler Shell Boilers".
4. Boiler welding is carried out in accordance with JB/T1613 "Technical Conditions for Welding Boiler Pressure Components".
5. The welding of boiler pressure components must be performed by welders who have passed the examination of "Examination and Management Rules for Welders of Boiler, Boiler, Pressure Vessel and Pressure Pipe".
6. Boiler non-destructive flaw detection test According to JB/T4730 "pressure-bearing equipment non-destructive detection" and "Steam Boiler Safety Technical Supervision Regulations" Article 82, the welded seam should be 100% flaw detected, and the quality is not lower than II and qualified.
7. After the boiler is manufactured, it shall be carried out in accordance with JB/T1612 "Technical Conditions for Boiler Hydraulic Test", and the test pressure is 1.2MPa.
8. Refer to the relevant regulations of JB/T1615-91 for the paint, packaging and transportation of the boiler